Phone: (540) 961-3576     Fax: (540) 953-3010      e-mail: mkt@vatell.com

Publication References


Index of Publications (in chronological order - last updated June, 2001)
 

by Vatell Co., its consultants and Employees
 

"Heat Flux Microsensors", presented at the 26th National Heat Transfer Conference, August 6-9, 1989, Hager, J.M., Onishi, S., Langley, L.W., Diller, T.E.

"Heat Flux Microsensors for Biological Measurements", Bioheat Transfer: Applications in Hyperthermia; Emerging Horizons in Instrumentation and
    Modeling, ASME, NY, 1989, pp. 115-119, Diller, T.E.

"New Fabrication Techniques for Heat Flux Microsensors", Proceedings of the Electrochemical Society High Temperature Symposium, Montreal, Canada,
    May 6-11, 1990, Hager, J.M., Walters, R.Y.P., Onishi, S.

"Experimental Performance of a Heat Flux Microsensor", presented at the 35th International Gas Turbine and Aeroengine Congress, Brussels, June 1990,
    ASME 90-GT-256, Hager, J.M., Simmons, S., Smith, D., Onishi. S., Langley, L.W., Diller, T.E.

"Simultaneous Measurements of Time-Resolved Surface Heat Flux and Freestream Turbulence at a Stagnation Point", Heat Transfer 1990, Vol.2,
    pp.375-380, Edited by Hetsroni, , G., Hemisphere Publishing, Simmons, S.G., Hager, J.M., Diller, T.E.

"High Temperature Heat Flux Measurements", presented at the 29th Aerospace Sciences Meeting, Jan.7-10, 1991/Reno, Nevada, AIAA 91-0165, Hager,
    J.M., Langley, L.W., Onishi, S., Diller, T.E.

"Heat Flux Microsensor Measurements", AIAA, 1992, pp.1-8, Terrel, J.P., Hager, J.M., Onishi, S., Diller, T.E.

"Heat Flux Microsensor Measurements and Calibrations", NASA Conference Publication 3161, The 1992 NASA Langley Measurement Technology
    Conference, pp.69-80, Terrel, J.P., Hager, J.M., Onishi, S., Diller, T.E.

"Advances in Heat Flux Measurements", Advances in Heat Transfer, published by Academic Press, 1993, pp. 279-367, Diller, T.E.

"Blood Perfusion Estimation from Noninvasive Heat Flux Measurements", HTD Vol. 268 - Advances in Bioheat Transfer 1993, ASME, pp. 53-60,
    Fouquet, Y., Hager, J.M., Terrel, J.P., Diller, T.E.

"Unsteady Surface Heat Flux and Temperature Measurements", ASME, 93-HT-33, pp.1-9, Baker, K.I., Diller, T.E.

"Microsensors for High Heat Flux Measurements", Journal of Thermophisics and Heat Transfer, Vol. 7, Number 3, July-September 1993, Hager, J.M.,
    Langley, L.W., Onishi, S., Diller, T.E.

"Shock Tunnel Evaluation of Heat Flux Sensors", 32nd Aerospace Sciences Meetings & Exhibit , AIAA94-0730, 1994, pp.1-7, Holmberg, D.G.,
    Mukkamala, Y.S., Diller, T.E.

"Time-Resolved Surface Heat Flux Measurements in the Wing/Body Junction Vortex", Journal of Thermophysics and Heat Transfer, 1994, Vol.8,
    Number 4, pp.656-663, Lewis, D.J., Simpson, R.L., Diller, T.E.

"High-Frequency Heat Flux Sensor Calibration and Modeling", Journal of Fluids Engineering, December 1995, Vol. 117, pp. 659-664, Holmberg, D.G.,
    Diller, T.E.

Measurements with a Heat Flux Microsensor Deposited on a Transonic Turbine Blade", CH34827-95, 1995 IEEE, pp. 1-7, Johnson, L.P., Diller, T.E.

"Development of a Noninvasive Blood Perfusion", Advances in Heat and Mass Transfer in Biotechnology-1996 , ASME, pp. 67-73, O'Reilly, T.B.,
    Gonzales, T.L, Diller, T.E.

"New High Sensitivity, Low Thermal Resistance Surface Mounted Heat Flux Transducer", ISA-1996, 0227-7576/96, pp. 235-249, Terrel, J.P., Vatell
    Corporation

"Effects of Shock Wave Passing on Turbine Blade Heat Transfer in a Transonic Cascade", presented at the 35th Aerospace Sciences Meeting & Exhibit,
    Jan. 6-10, 1997, AIAA 97-0160, Nix, A.C., Reid, T., Peabody, H., Ng, W.F., Diller, T.E.,

"Estimation of Blood Perfusion using a Minimally Invasive Blood Perfusion Probe", IMECE, Dallas, 1997, Scott, E.P., Robinson, P., Diller, T.E.

"Turbulence Structure of Heat Transfer Through a Three-Dimensional Boundary Layer" Journal of Thermophysics and Heat Transfer, Vol. 12, Number 2,
    April-June 1998, pp.248-255, Lewis, D.J., Simpson, R.L., Diller, T.E.
 
 

Bibliography of Related Work by Others

"Approximations in Transient Surface Heating", Australian Journal of Scientific Research A, Vol.5, 1952, pp.1-9, Jaeger, J.C.

"Measurement of Frequency Response and Steady State Response of a Novel Thin Film Heat Flux Gage", presented at the 31st AIAA/ASME/SAE/ASEE
    Joint Propulsion Conference and Exhibit, July 10-12, 1995/San Diego, CA, AIAA 95-2788, Cho, C.S.K., Fralick, G.C.

"Measurement and Modeling of Thermal Flows in an Air-cooled Engine", Tillock, Brad R., and Martin Jay K., SAE Paper No. 961731

"Local Convective Heat Transfer to Submarged Pulsating Jets", E.C. Mladin and D.A. Zumbrunnen, presented at 1996 ASME National Heat Transfer
    Conference

"Wall-Jet Turbulent Boundary Layer Heat Flux, Velocity, and temperature Spectra and Time Scales", presented at 1996 Gas Turbulence Conference,
    Holmberg, D.G., Pestian, D.

"Effects of Ignition Timing and Air-fuel Ratio on In-cylinder Heat Flux and Temperatures in a Four-stroke, Air-cooled, Homogeneous Charge Engine",
    Boyce, Brian P., Martin, Jay K., Poehlman, Art, and Shears, Doug, SAE Paper No. 1999-284

"Steady-state Thermal Flows in an Air-cooled Four Stroke SI Engine", Boyce, Brian P., Martin, Jay K., and Tillock, Brad R., SAE Paper No.
    1999-01-0282

"A Comparison of Radiation Versus Convection Calibration of Thin-Film Heat Flux Gauges," Smith, D. E., Bubb, J. V., Popp, O., Diller, T. E., and
    Hevey, S. J., in Proceedings of the ASME Heat Transfer Division -- 1999, HTD-Vol. 364-4, ASME, NY, 1999, pp. 79-84.

"Application of Heat Flux Sensors to Detect Liquid Fuel Films within the Cylinder of Firing SI Engine", Ioannou, Marios and Nightingale, J.E., SAE Paper
    2000-01-2841